Faster Heating, Stronger Bonds for Carbon Composites

EducationK Puspa18 Nov 2026

CHANGWON, South Korea, Nov18: A research team led by Dr. Youngseok Oh and Dr. Jinsu Kim of the Composites & Convergence Materials Research Division at the Korea Institute of Materials Science, headed by President Chul-jin Choi, has developed an induction joining technology that enables rapid and uniform heating and bonding of carbon fiber-reinforced thermoplastic composites using a nanocomposite aerogel combining carbon nanotubes, magnetic iron oxide (Fe₃O₄), and polyamide 6 (PA6). The technology enables faster and stronger assembly of lightweight, high-strength carbon composite components used in automobiles and aircraft. By increasing the initial heating rate by up to 94.6% while improving joint strength, the technology is expected to reduce assembly times and enhance productivity in the automotive and aerospace industries. 

Carbon fiber-reinforced thermoplastic composites are attracting attention as next-generation lightweight structural materials for automotive and aerospace applications because they combine high strength and low weight with the ability to soften when heated. Induction joining is particularly well suited for high-speed, automated manufacturing because it enables rapid, non-contact heating of only the joining interface rather than the entire component. However, conventional induction joining methods face challenges in achieving uniform induced current flow within carbon fibers, while variations in magnetic-field distribution can cause uneven heating. As a result, some areas of the joining interface may not melt sufficiently, while others become locally overheated. These limitations can compromise joint quality and strength, hindering wider industrial adoption.

To overcome these challenges, the research team developed a new joining material capable of generating heat rapidly and uniformly between carbon composite components. The researchers combined carbon nanotubes (CNTs), magnetic iron oxide (Fe₃O₄), and polyamide 6 (PA6) to create a highly porous nanocomposite aerogel. Using a freeze-drying process, they ensured that the relatively heavy Fe₃O₄ particles remained uniformly dispersed among the CNTs rather than settling in one area. The aerogel was then processed into powder and evenly distributed between the joining surfaces of two carbon composite components.

When induction heating is applied, the CNTs and Fe₃O₄ generate heat through different mechanisms, allowing the joining interface to heat rapidly and uniformly. The CNTs generate and transfer heat through electrical conduction and Joule heating, while Fe₃O₄ produces heat in response to an alternating magnetic field. The resulting heat melts the PA6, allowing it to flow between the two carbon composite components and facilitate bonding. The key advantage of this approach is that combining two complementary heating mechanisms increases the heating rate while reducing localized overheating, enabling more uniform bonding across the entire joining interface.

Experimental results showed that the developed material increased the initial heating rate by up to 94.6% compared with conventional carbon composites without the nanocomposite interlayer, while reducing the time required to reach the target joining temperature by 57%. Joint strength also improved by 30.8%. Uniform heating of the joining interface allowed the molten resin to spread more effectively between the composite components. In addition, the CNTs continued to act as nanoscale mechanical pins after joining, helping hold the two components together and further strengthening the joint.

The technology is expected to find applications in industries that require rapid assembly of lightweight, high-strength carbon composite components, including automotive manufacturing, aerospace, and urban air mobility (UAM). Because induction heating can selectively heat only the required areas, the technology could also be applied to localized joining and repair of large composite structures. The research team has filed a patent application for the technology and plans to develop an artificial intelligence (AI)-based system capable of predicting temperature distributions during induction heating and automatically identifying and controlling optimal processing conditions.

“The significance of this study lies in combining electrical and magnetic heating mechanisms within a single nanocomposite material to simultaneously improve the heating rate, temperature uniformity, and joint strength of carbon composites,” said Youngseok Oh, Principal Researcher and project leader at KIMS. “We plan to further advance this technology so that it can be applied to high-speed, automated composite assembly processes in the automotive and aerospace industries.”

The research was supported by the Ministry of Science and ICT through research projects funded by the National Research Foundation of Korea (NRF) and the KIMS Institutional Research Program. Researchers from Oak Ridge National Laboratory (ORNL) in the United States also participated in the collaborative study led by KIMS. The findings were published online on September 2, 2026, in Advanced Composites and Hybrid Materials (Impact Factor: 15.5; JCR top 2.5%), a leading international journal in materials science. The paper is titled “Synergistic Heating Effect via CNT/Fe₃O₄ Nanocomposite Aerogels Enabling Uniform and Rapid Induction Welding with High Bond Strength in CFRTPs.”